Labels:text | screenshot | font | parallel | receipt | number | diagram | line | document OCR: SEAT INOPERATIVE MOTORS OPERATE MOTORS INOPERATE CHECK FOR A BINDING CONDITION IN THE SEAT LINKAGE, ORA STRIPPED DRIVE IN THE MOTOR. CHECK THE PWR .- ACC. CIRCUIT BREAKER CIRCUIT BREAKER O.K. CIRCUIT BREAKER STAYS OPEN. REMOVE THE POWER SEAT SWITCH. USING ATEST LAMP, CHECK REPLACE CIRCUIT BREAKER. FOR VOLTAGE BETWEEN CAVITY C AND CAVITY F OF THE WIRING HARNESS. TEST LAMP LIGHTS. TEST LAMP DOES NOT LIGHT. CHECK FOR VOLTAGE BETWEEN CAVITY F AND A GOOD CHASSIS GROUND. TEST LAMP LIGHTS. TEST LAMP DOES NOT LIGHT. REPAIR THE BLACK GROUND WIRE. REPAIR THE SHORT OR OPEN IN THE ORANGE/BLACK WIRE. REPLACE THE POWER SEAT SWITCH. DISCONNECT THE CONNECTOR FROM THE REAR TILT MOTOR. CHECK FOR VOLTAGE BETWEEN THE DK BLUE AND DK GREEN WIRES WITH THE REAR TILT SWITCH IN BOTH THE UP AND DOWN POSITIONS. TEST LAMP LIGHTS IN TEST LAMP LIGHTS IN ONLY ONE POSITION. BOTH POSITIONS. TEST LAMP DOES NOT LIGHT. REPLACE THE SWITCH. CHECK FOR OPENS OR SHORTS IN THE DK BLUE AND DK GREEN WIRES FROM THE MOTOR TO THE SWITCH. WIRE O.K. NOT SHORTED OR OPEN. WIRES SHORTED OR OPEN. REPLACE SWITCH. REPAIR THE WIRING. RECONNECT THE REAT TILT HARNESS.
(.png)
